Tough waterproof remote control with LCD for marine equipment with chain counter:
* Windlasses * Thrusters * Lights * Anchorwash * Davits * Passerelles *
Kit includes one handheld console unit with cradle, one base station, a deck socket with 2m lead, a socket sealing cap, one sensor, 2 magnets, screws for the cradle and socket, installation and operation instructions.
Features
- 4 metres spiral cable
- Electrical protection against back-emf
- Rubber over-moulding for shock protection and grip
- Stowage on cradle
- Operation in parallel with all AutoAnchor products eg toggle switches, foot switches or other control equipment
- Connect to DC, AC and hydraulic systems
- Rugged cable and connectors with:
- Moulded plug and socket rated to IP67
- 2m flying lead from socket for better connectivity
- Gold plated contacts on plug and socket to reduce corrosion
- Socket sealing cap
- Present the length of rode to deploy
- Plus Windlass Control with Chain Counter
- Counts rope/chain or all-chain rode
- AA703 Base StationChoice of feet, metres or fathoms measurement
- Logs windlass operating hours for maintenance
- Easy calibration
- Electronic diagnostics for troubleshooting installation
- Auto stop and docking alarm when the anchor is close to docking
- Two speed operation
Specifications
Current Consumption
50mA
Power Supply
12/24V DC
Temperature Range
23°F to 140°F (-5°C to 60°C)
Output Maximum Current Draw
12V DC: 3.5A 24V DC: 3.5A
Output Minimum Current Draw
12V DC: 10mA 24V DC: 20mA
When connecting to solid stage switching or other low current windlass drive, a PLC or AC variable frequency drive, a dummy resistor load may be required.
IP Rating
IP67
Outputs
6
Rode – Chain Only
Stainless or galvanised steel
Rode – Rope and Chain
Must have a minimum of 10ft (3m) of chain. Chain must be galvanised steel. Rope should be a good quality nylon anchor rope. Type 66 or equivalent
EMC/Protection/CE
EN60945
For DC windlasses a dual direction solenoid is required.
