Adjustable Platform

RAILBLAZA Platforms will fit into any RAILBLAZA mount, or many sailboat winch handle receivers. The Platform can be used as a flat surface to make many items StarPort compatible, meaning these items can all be plugged in and locked in place on your inflatable, kayak, sailboat or any other place that will take a StarPort. The platform comes with pre-moulded screw holes, or more holes can easily be drilled, it allows you to tilt items 180 degrees, in 15 degree increments.


Rod Holder Extender

If your rod holder is just out of reach, or the rod butt is hitting the deck of your kayak, then you need a RAILBLAZA Rod Holder Extender. The addition of a Rod Holder Extender to your rod holder will let you offset your rod holder too, adding another level of versatility to any RAILBLAZA rod holder. You can make your setup ergonomically better, get easier access to your rod holder. More importantly, you’ll have the rod in your hand faster when you get a strike.


Fixed Extender

The Fixed Extender gives you 125 mm (5 in) of clearance from the StarPort – perfect for raising RAILBLAZA’s Fillet Table – also an optimum distance for tight space requirements on kayaks or similar-sized craft.


Adjustable Extender R-Lock

With two rotating R-Lock friction joints and a knuckle joint that tilts in 15° increments, the Adjustable Extender R-Lock adds great versatility. When coupled with one of RAILBLAZA’s large range of accessories, it helps keep hold of your Fillet Table, fish finder, or any number of useful items.


SwivelPort

The SwivelPort is designed to allow accessories to be easily rotated 360°. Factory set friction joint. Can be attached to any StarPort, SidePort, RIBPort or RailMount and will receive any RAILBLAZA accessory.


Hatch Wedge

The Hatch Wedge can be used in multiple positions to hold your marine window hatches open at four different heights. This will allow you to keep your boat or yacht well ventilated through the warm summer months without having to worry about your hatches falling down or slamming shut on unsuspecting fingers. The Hatch Wedge also comes with a tether point so that it can be attached to the access hatch to avoid loss.


Captain’s Hook Pair

The Captain’s Hook is an expandable low-profile solution for hanging your ropes, hoses, paddles, bikes and much more. If you need a hook to hold things, but want something that won’t stick out and get in the way, then the Captain’s Hook is the solution. Simply screw it to the surface and tie a knot at each end of the cord, simple. Supplied with stainless steel screws, the 1 metre (3ft) length of cord can be cut shorter if needed. When not in use it is low profile to avoid catching people or clothes.


Rowlock Pair

RAILBLAZA have taken yet another step in increasing the versatility of the RIBPort system. Available in black or white, the RAILBLAZA Rowlock Pair attaches to the oar itself, and clips in and out of the RIBPort. Transform your Rowlock into a Rod Holder, and back again! By positioning a pair of RIBPorts in place of the usual rowlocks on your small inflatable or RIB, it becomes a matter of simply clipping out your oar to clear the tube, and then you can clip in a rod holder, fillet table, mobile phone holder, drink holder or any of the large range of RAILBLAZA accessories.


Clevis/Bimini Support

Connect it with a Clevis. There are many uses for a clevis, and we’re sure you will find more uses than we can think of! The RAILBLAZA Clevis is the simple way to attach a Bimini, and remove with a quick flick of the StarPort locking slide, no screws or tools required!


Hook 25, Eye 25, Webeye 30

If you can’t hold it, hang it. The HOOK25’s simplicity belies its usefulness. It fits into any RAILBLAZA StarPort and is great for coathangers, ropes, or plain hanging around. This EYE25 is ideal for tethering, storage, lashings and clotheslines, etc. The WEBEYE30 is made for webbing straps, reducing fold-over and fraying. They can assist in securing large items like cannisters or dive bottles, and have been known to hold the tips of fishing rods when paired with a G-HOLD.


Attachment Adaptor

You can attach RAILBLAZA adaptors to anything you like to make them StarPort compatible, or bolt the 2 adaptors together to make a male to male fitting.
The male to male fitting has been used to create a detachable system for tubes on kayak sailor kits and outriggers. It has many other applications, enhancing the versatility of the RAILBLAZA StarPort system. StarPort Adaptors are supplied in pairs, with stainless steel mounting screws.