The RAILBLAZA StarPort is a unique and multifunctional mounting bracket for boating accessories, that can be used in a number of different ways. The main purpose of the StarPort is to allow users to fit and swap out our full range of RAILBLAZA accessories onto power boats, inflatables, sail boats, kayaks, ATVs, garages and any other place you wish to place them.
If you need to mount on a vertical surface, but require a horizontal port (or vice versa), the SidePort is the mount for you. It’s ideally suited for gunwales of smaller aluminium boats or vertical cockpit wells on kayaks. Fitted in only minutes, and sold with all necessary stainless steel fasteners the SidePort is a fantastic mount and great value for money.
Many vessels are made to suit the mount base pattern of Scotty, RAM, Cannon, Fish-On, and many others. Now RAILBLAZA’s original accessories can easily be fitted to these vessels. After many, many requests RAILBLAZA introduced a StarPort to fit straight into this space, the StarPort HD. This is a stylish, four screw base mount, which comes with the popular RAILBLAZA locking slide, and is lower in profile than others on the market.
RAILBLAZA RailMounts are simple-to-use mounts, allowing the easy attachment of RAILBLAZA accessories, and many other things. Simply screw the RailMount together onto our rail, no need to drill holes so you can easily move the RailMount to a different spot, and your rail is as good as new! The RailMount 10-25 can be mounted onto any 19 or 25mm rail in minutes. All RailMounts come complete with adapters, rubber grips, self-adhesive grip tape and the necessary stainless steel mounting screws.
The RailMount 32-41 is specifically designed for both round and square 32mm rails, 41mm round rails such as those found on Hobie kayak outriggers, and the Hoble H-Rail. All RailMounts come complete with adapters, rubber grips, self-adhesive grip tape and the necessary stainless steel mounting screws.
Fitting Rod holders and other accessories to RIB’s & Inflatable boats just got easier. Now you can fit accessories like rod holders, bait boards, fish finders and more to RIB or Inflatable boats, SUPs and kayaks without hassle or messy glues. The new 3M VHB pad allows you to peel and stick the RIBPort mount, then fit any of your favorite RAILBLAZA accessories. The 3M VHB is now supplied with every RIBPort pack. Available in Black, White and Grey.
Bringing the Functionality of the CleatPort to your PVC or Hypalon Inflatable boat. It’s a simple idea, but very effective. Now your cleat can hold your fishing rod, mobile phone, drink, navilight, or anything else that a RAILBLAZA accessory can hold. The Cleat gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. The CleatPort RIBmount is now supplied with the new 3M VHB pad this allows you to peel and stick the CleatPort RIBmount, then fit any of your favorite RAILBLAZA accessories.
This stylish, low profile, stick on mount is easily fitted to most surfaces. It is designed for use where fasteners are unable to be used. Applications include inflatable boats and SUP’s. It will also work well on fibreglass SUP’s, aluminium and fibreglass decks.
Two applications in one. The CleatPort gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. Included is a unique backing plate keeping stainless fastenings isolated from aluminium decks avoiding corrosion.
E Series USB Port
The E Series USB StarPort combines a USB connector within our StarPort base allowing you to charge your tablets, mobile phones and many other devices. It is designed for use on a 12 VDC supply, rated at 2.1Amps. For charging only and not for data transfer.
E Series DC Port
The E Series 12V StarPort combines a 12 volt DC 3 amp socket within our StarPort base allowing the connection of LED spotlights, cabin fans, depth sounders and many other devices. You can easily plug your devices in for use, then transfer it to another location, remove and replace with another accessory, or pack them away. When not in use the water tight cap seals off the socket. The E series DC Port can also be mounted on the RAILBLAZA range of RailMounts allowing easy mounting and removal for LED floodlights.
The RAILBLAZA TracWedge enables the easy installation of StarPorts and SidePorts into the gunwale tracks on most aluminium boat brands in Australia under 4m. No drilling of holes required and ports can be moved easily.
It allows tool free installation of SidePorts and StarPorts to boat brands like Tracker VersaTrack, Lund Sport Trak, Princecraft PrinceTrak, and Crestliner Lock Track. TracLoader can be installed and removed at any point along the gunwale track without tools. Once in place it allows you to fit and swap out our full range of RAILBLAZA accessories and systems, including Rodholders, Drinkholders, Baitboards, depth sounders and much more.
TracLoader SureMount fits the aluminum gunwale tracks of 2018 and later Crestliner models 2018. It allows tool free installation of SidePorts and StarPorts to these gunwale tracks. TracLoader SureMount can be installed and removed at any point along the gunwale track without tools. Once in place it allows you to fit and swap out our full range of RAILBLAZA accessories and systems, including rod holders, drink holders, fillet tables, depth sounders and much more.
Rigging your craft with RAILBLAZA accessories just got a whole lot quicker and more versatile with the MiniPort TracMount. No tools required, The MiniPort TracMount is designed to fit most existing tracks, including YakAttack, Wilderness Systems, Native Watercraft and Yak Gear. Completely tool-less operation which is easily fitted and adjusted simply by turning the MiniPort which tightens directly in the track using our TracNut. Re-positioning in the track is as simple as turning to release the tension.